Academy
SP Wicks – Pack of 1000
SP wicks allow you to equip your container candles with a range of sizes and lengths, available on this product page. Made in Europe from cotton threads, they are supplied pre-waxed and fitted with their metal wick sustainer. A practical format for preparing your scented prototypes, selecting the best-performing setup and then organizing your production.
Order with confidence
- ✓Wick Sp100 pre-waxed of 9 cm with wick sustainer marked under the reference 131-79
- ✓Packaging of 1,000 units intended for professional use
- ✓Selection advice and test protocol adapted to this wick
- ✓Technical data sheet and SDS available
À partir de
Reduced price:
€47.50
Save 5%
VAT excluded Franco - Livraison comprise
What is the 9 cm wick Sp100 used for?
The wick Sp100 9 cm for candle is used to supply the flame with melted wax in container creations. Its short format accompanies very wide and low containers, when assembly does not require a large reserve of length.
It is aimed at candle makers, brands and manufacturers who are developing collections in these formats.
The wick candle Sp100 9 cm with wick sustainer is supplied pre-waxed and mounted on its metal wick sustainer. It simplifies fixing and centering, while limiting the trimming when the height of the container corresponds to this format.
The essential references of the 9 cm wick Sp100
PRODUCT TYPE Cotton wick pre-waxed
REFERENCE 131-79
MAIN APPLICATION Container candles
RANGE SP
ADVERTISED COMPOSITION 100% cotton
FORMAT Pre-cut at 9 cm, pre-waxed and mounted on metallic wick sustainer
SUPPORT Wick sustainer metal included
PACKAGING Bag of 1,000 wicks
INDICATIVE DIAMETER 100 to 110 mm
ADVERTISED WAXES Soya, rapeseed and sunflower; other formulas to test
SCENTED OR COLORED FORMULA Validation by a burning test
VALIDATION Complete test in the finished candle
Why choose the 9 cm wick Sp100 for this type of project?
The SP wick100 9 cm is a wick cotton pre-waxed, ready to put in place. The SP wick100 for candle also corresponds to the SP wick100 pre-waxed; the diameter remains a benchmark to be confirmed by a complete test. To make candles, test this wick with the candle wax actually used: paraffin, soy wax, beeswax, stearin or other vegetable or natural wax. A scented candle, poured into a pot or molded, does not behave in the same way.
In which projects should you use the 9 cm wick Sp100?
CONTAINER CANDLES
Container candles
The 9 cm wick Sp100 has the central application of the container candle in a pot adapted to thermal constraints. The 100 to 110 mm range guides the first prototype.
Note the internal diameter and the wax level before selecting the format; the name of the range is only a reference.
WAXES TO TEST
Vegetable or mineral wax candles
Soy, rapeseed, sunflower waxes and other advertised materials must be tested separately with Sp100 in 9 cm.
Do not transfer a result from one batch of wax to another: prepare a new series around Sp100 in 9 cm and document the difference.
SCENTED CANDLES
Scented candles containing
The 9 cm wick Sp100 can enter into a scented protocol provided that the actual formula is used from the beginning. Controls.
Keep the same wax and the same additions when you pit the 9 cm wick Sp100 against a neighboring option.
COLORED CANDLES
Coloured candles in container
To evaluate Sp100 in 9 cm in a tinted candle, integrate the final dye from the prototype and document its impact on combustion.
When evaluating Sp100 in 9 cm, another coloring, even with the same wax, requires its own validation.
NOT RECOMMENDED
Fondants and pebbles scented
Scented fondants and pebbles can be used without combustion by wick.
This product is therefore not used in these creations.
NOT RECOMMENDED
Moulded candles, pillars or multi-wicks without dedicated test
Moulded candles, pillars and multi-wicks configurations require separate selection and protocol.
Do not retain this wick for these formats without dedicated burning tests.
Does the 9 cm wick Sp100 correspond to your configuration?
✓ Choisissez ce produit si vous souhaitez
✓ Your need corresponds to very large diameter containers with little useful length, within the framework of Sp100 in 9 cm;
✓ You are looking for a short format for high power, within the framework of Sp100 in 9 cm;
✓ The protocol allows you to vary only the wick against a close reference, a criterion to be confirmed for Sp100 in 9 cm;
✓ You record the assembly of this wick and the result of each cycle;
→ Ce n'est pas fait pour vous si
→ The actual sizes of the project are not consistent with the 9 cm format chosen;
→ The burning cycle with this wick remains outside the criteria and justifies the opening of a new axis of comparison;
→ The assembly uses a moulded candle or several wickss without prior qualification of Sp100 in 9 cm;
→ The flame, the deposits or the temperature of the pot remain outside your criteria after several tests with Sp100 in 9 cm.
How to prepare and test the 9 cm wick Sp100?
1
How to prepare and test the 9 cm wick Sp100?
To make regular candles, compare several cotton wicks in identical pots. Paraffin wax, soy wax or beeswax do not produce the same melt. Natural waxes and stearin blends can also modify the flame. When manufacturing scented candles, keep the same container, the same base and the same dosage of fragrance or dye between two tests. Containers and molds require separate protocols. Check the combustion of container candles like that of moulded candles: a suitable cotton wick should burn regularly.
The 9 cm wick Sp100 or a other format: how to organize the comparison?
Critère
SP100 WAXED WICK 9 CM WITH COVER
THINNER OR SIMPLE OPTION
MORE POWERFUL OPTION
Main use
Container candles
Small diameter or easy to feed formula
Large diameter or more demanding formula
FORMAT
PRE-CUT TO 9 CM, WAXED AND MOUNTED ON A METAL SCREW
TO SELECT FROM THE SAME FAMILY
TO SELECT FROM THE SAME FAMILY
Initial mark
100 to 110 mm
Lower diameter
Larger diameter
CHECK PRIORITY
FLAME, FUSION BATH AND TEMPERATURE
ABSENCE OF TUNNEL
ABILITY OF SOOT AND OVERHEATING
Variable to keep fixed
Wax, fragrance, colorant and container
Even protocol
Even protocol
VALIDATION
FULL BURNING OF THE CANDLE
FULL BURNING
FULL BURNING
How to select a wick around Sp100 in 9 cm?
Choose the wick according to the diameter of the container
The indicative range of 100 to 110 mm places the wick Sp100 among the models to try for this type of container. Measure the inside diameter at the wax, then test the candle all the way to the bottom. Use this format if the flame remains stable and the weld pool progresses without tunneling or excessive heating.
Choose the wick according to the wax
The wax directly influences the power supply of the wick Sp100: a firmer, more flexible or differently formulated reference can change the flame. Carry out the test with the wax actually sold in the final container, then compare a neighboring size if the surface melts poorly or if the melt pool becomes too large.
Choose the wick according to the fragrance and the dye
Fragrance and coloring can change the way the wax feeds the wick Sp100. So test the fragrance, color and dosages provided for the candle sold, without starting from a neutral wax sample. As soon as one of these elements changes, do a complete burn again before keeping the same choice of wick.
Choose wick according to production
This 9 cm version is already pre-waxed and mounted on a metal wick sustainer, which simplifies centering and preparation of series. Check that its length is suitable for the filling height, then carry out the final trim after cooling. The bag of 1,000 units is intended for regular productions already validated.
Packaging and storage
The 9 cm wick Sp100 is packaged in the form of a bag of 1,000 wicks. Close the packaging after sampling and clearly attach the reference 131-79 to the started batch.
✓ Store the 9 cm wick Sp100 away from humidity, dirt and sunlight.
✓ Protect the stock against deformation of the 9 cm wick Sp100 or its wick sustainer.
✓ Clearly isolate reference 131-79 from similar formats to limit sampling errors.
✓ Handle this wick with clean hands and cleaned tools during cutting, fixing and centering.
✓ Apply chronological stock management to reference 131-79 and record the date of implementation service.
✓ Examine the regularity of the 9 cm wick Sp100 before its use in mass production.
Certifications and regulatory information
The stated specifications apply only to the product and batch supplied.
For the finished candle, check:
✓ The composition and construction of the wick
✓ The length, section or diameter announced
✓ Compatibility with wax, fragrance and dye
✓ Assembly, centering and cutting
✓ Combustion in the container or mold retained
✓ Labeling and obligations of the target market
The manufacturer remains responsible for the safety, testing and conformity of the finished candle.
Useful equipment around the 9 cm wick Sp100
Wicks
Wicks in cotton
To compare this product to sizes neighbors.
FixationSupports and adhesive pellets
To attach the wick to the center of the container.
CenteringWick centerers
To maintain the wick right during casting.
ControlWick cutter and ruler
To measure and adjust its height before lighting.
MaterialWaxes for candles
To test wick with the formula actually used.
FragrancesFragrances for candles
To validate combustion with the chosen fragrance.
ColoringCandle dyes
To check their effect on combustion.
MeasurementScale, thermometer and test sheets
To weigh, control the temperature and note the tests.
Frequently asked questions about the 9 cm wick Sp100
Find the answers to the most frequently asked questions about the Sp100 in 9 cm: container, wax, fragrance, assembly, storage and combustion tests.
The 9 cm wick Sp100 targets very large diameter containers with little useful length. Its distinctive interest consists of testing a wide wick Sp100 without maintaining a long cutting length. The final decision is based on the cycles of the candle prepared with the full commercial recipe.
The benchmark announced for Sp100 in 9 cm is 100 to 110 mm. Check the interior width in the filled area and treat this range as a starting point for testing.
In the test protocol, this dimension provides a short format for high power. Confirm this choice after checking the working height, the fixing method and the cutting reserve.
Yes. The announced vegetable wax families can be tested with Sp100 in 9 cm. However, use the specific wax, fragrance and color intended for the commercial product.
Prepare the controls with the intended fragrance and dosage. Another fragrance or a different rate requires restarting the protocol from the beginning.
Yes, the metal wick sustainer is included and already mounted on the 9 cm wick Sp100. However, check its alignment before attaching the wick to the bottom of the container.
First contrast the 9 cm wick Sp100 with a lower Sp power if the pot is narrower. The defect observed will then indicate whether it is relevant to introduce the 15 cm version.
Record the start of the flame, its profile, the opening of the weld pool, any deposits and the heating of the container. Identify each test sheet with reference 131-79.
Before assigning a tunnel to this single model, check the recipe, rest and cycle duration. Then modify a single parameter to make the comparison readable.
Compare another wick when repeat examples of this model remain out of criteria after checking centering and fit. Press the next choice on the gap actually measured.
Keep the package closed in a dry place and protect Sp100 in 9 cm from deformation or contamination. Visibly distinguish the batch from similar format references.
Because the result obtained with this wick cannot be dissociated from the wax, the additions, the container and the assembly. A test carried out thoroughly on several units avoids drawing a conclusion from a single case.
Service client dédié
Tarifs dégressifs
Livraison 24 h en Europe
+ 900 m² de stock dispo
Paiement en plusieurs fois
Commande en grandes quantités ?
Des questions sur la livraison ? Besoin d'en savoir plus sur nos produits ?
Privilégions le contact humain : contactez-nous pour demander un devis précis, commander un échantillon ou avoir des renseignements sur nos tarifs.
Demander un devis
04 75 54 35 05
Votre demande de devis